Route planner
Station to station: which line, how many stops, where you change and roughly when you arrive — to the published timetable.
Plan your train journey
Choose your start and end stations, the day and the time you set off, then tap Work out the journey. You will see which line to take, how many stops it is, where you change line and roughly when you arrive. It uses our estimated running times for the 25 stations and 3 lines of the O-Train — OC Transpo does not publish an open timetable, so these are careful estimates, not live data.
How the calculator works
The time is the time on the train: the run between each pair of stations, added up from your first station to your last. These times are estimated from the distance between stations. As a check: end to end, Line 1 (Confederation) takes about 22 minutes and Line 2 (Trillium) about 35 — the figures you get by adding up the legs.
What is not counted, and why:
- The wait on the platform. It depends on when you get there. Trains run every few minutes in the peak and every 10–15 minutes off-peak; the timetable shows the service span and how often trains run.
- The change between lines. You change at a central hub such as Bayview or South Keys and take the next train — there is no published wait and we do not invent one.
- Delays. This is the planned timetable, not live information.
A time after midnight belongs to the night of the day you choose: Friday 00:30 is the night of Friday into Saturday, because that is how that train sits in the timetable.
Changing line: the central hubs
Most OC Transpo lines run through the heart of the city and meet at a handful of central hubs — above all Bayview and Bayview. To go from one line to another you get off and take the next train on the other line; the central city is also a Free Transit Zone, so short trips across the middle are free. There is no published waiting time, so we do not add one, but the planner tells you where your journey changes line:
